polabs

Home/Tag:polabs

Oscilloscope probe compensation

By |September 5th, 2016|Logic analyzer, Other, PC oscilloscope, PoScope, Signal generator, USB oscilloscope|

Oscilloscope probe compensation is a procedure to reduce impact of probes on measured signal. We have to keep in mind that oscilloscope probes aren't just pieces of wire with pointy end attached to them. Here are two important aspects to consider when selecting and using probe: Faithfully transmit the signal from your device under test to the [...]

Record and export data captured with USB oscilloscope PoScopeMega1

By |November 24th, 2015|Logic analyzer, USB oscilloscope|

This article will show you how to record and export data captured with USB oscilloscope PoScopeMega1. To follow this tutorial we need to meet requirements below: we need PoScope Mega1 device. If you don't have it you can buy it here. we need PC with pre-installed Windows operating system (XP, Vista, 7, 8, 10) we [...]

Lowest power consumption USB oscilloscope

By |October 21st, 2015|PC oscilloscope, USB oscilloscope|

  USB oscilloscopes in general offers really low power consumption. Low power consumption is important factor when buying an oscilloscope for two main reasons. One is definitely saving the energy and the second reason is highly connected with the first one and it's autonomy of measurement system. Measurement system usually represent a personal computer and [...]

Load More Posts