Stepper motor

Home/CNC Machine/Stepper motor

PoLabs and Lego Maters 2017

By |March 27th, 2017|CNC, CNC controller, CNC Machine, Logic analyzer, Other, PC oscilloscope, PLC, PoKeys, PoScope, Signal generator, Stepper driver, Stepper motor, USB oscilloscope|

PoLabs was sponsoring the Lego Master 2017 competition on Faculty of Electrical Engineering, University of Ljubljana Quoted from source: http://lego-masters.si/ The fifth contest Lego Masters is behind us. The organizers would like to thank all the participants that they devoted the last few months to preparations for the competition, which they also attended. Special thanks also [...]

PoBlocks tutorial – Pulse engine, custom PoIL code

By |May 27th, 2016|Home automation, Other, PLC, PoKeys, Stepper driver, Stepper motor|

In this PoBlocks tutorial, we will describe how PoBlocks can be used to solve a stepper motor positioning task. PoBlocks is a graphical programming tool for PoKeys device and is free of charge for PoKeys users. Background We have been approached by one of our users on how a positioning system can be implemented using [...]

Mach3 setup tutorial – first movements

By |January 11th, 2016|CNC, CNC controller, CNC Machine, PoKeys, Stepper driver, Stepper motor|

Mach3 setup tutorial summary This Mach3 setup tutorial will show you how to connect everything together and how to configure the PoKeys plugin so you can move your CNC. You can find the previous Mach3 setup tutorial here. Connecting everything together First you must connect the stepper motors to the drivers. This first step is [...]

Stepper motor driver – explanation

By |November 30th, 2015|CNC Machine, PoKeys, Stepper driver, Stepper motor|

What is a stepper motor driver? A stepper motor driver is an electronic device that is used to drive the stepper motor. By itself it usually does nothing and must be used together with a controller like PoKeys57CNC. There are a lot of different types of stepper motor drivers but in general all do the [...]

PoKeys tutorial – getting started with PoKeys57CNC

By |October 23rd, 2015|CNC controller, CNC Machine, Stepper driver, Stepper motor|

This post is a first PoKeys tutorial in the series of the tutorials for PoKeys57CNC devices. This one will cover the basics on connecting your PoKeys device with the computer and configuring the network connection if it is used. PoKeys57CNC is a blend between general purpose PoKeys device and a USB CNC controller. The device [...]

Mach3 tutorial with PoKeys – first steps

By |October 22nd, 2015|CNC, CNC controller, CNC Machine, PoKeys, Stepper driver, Stepper motor|

Introduction to Mach3 tutorial This is the first Mach3 tutorial in a series of tutorials which will help you to know PoKeys devices and how to use them with Mach 3 software for controlling your CNC machine. The tutorials will begin with simple configurations which will describe how to setup Mach3 and PoKeys plugin properly [...]

Load More Posts