tine

Home/Tine Dolžan

About Tine Dolžan

This author has not yet filled in any details.
So far Tine Dolžan has created 4 blog entries.

Raspberry Pi 3 and PoRelay8 relay boards – Part 2 (CAN bus)

By |February 13th, 2018|Other, PoKeys|

First part of this blog (you can find it here) was about connecting and controlling single PoRelay8 board with Raspberry Pi. Relay board and Raspberry Pi were communicating over I2C bus. Setup in this example has two limitations: First, I2C bus was developed for communication between devices on same PCB and can be used only [...]

PoKeys meets ThingSpeak – reporting data to IoT cloud

By |January 17th, 2018|Other|

ate in December Xively IoT platform has announced retirement of its free service Xively Personal, support for which was already integrated into our Ethernet PoKeys devices. One of possible alternatives is ThingSpeak IoT platform. Free version offers up to 3 channels, each can contain 8 data fields. Number of messages is limited to 3 million [...]

Raspberry Pi and PoRelay8 relay boards – Part 1

By |December 21st, 2017|Home automation, How to, Other|

PoRelay8 is a relay board and features 8 relay outputs. Up to 10 boards can be daisy-chained over the CAN bus for up to 80 additional outputs. In previous blog (Using PoRelay8 with PoKeys and long cables) we wrote about connecting PoRelay8 relay board to PoKeys57U device over the PoExtBus. The PoRelay8 is an updated [...]

Using PoRelay8 with PoKeys and long cables

By |November 29th, 2017|Other, PoKeys|

Porelay8 board allows expanding the number of outputs of the PoKeys device by using the PoExtBus. It features 8 relay outputs. Up to 10 boards can be daisy-chained over the CAN bus for up to 80 additional outputs. CAN (Controller Area Network) bus is a robust bus standard initially designed for automotive use to allow [...]

Load More Posts